Introduction
公司介紹

Truly Dragon Industrial Limited (TG), was founded in Taiwan in 1991. For the purpose of advancing production capability and resource superiority, TG moved the factory to Shenzhen for investment in 1996. The location is close to Yantian Port and Shekou Port, where we have a great transportation advantage for land and water. We have devoted ourselves to producing safe, high-end baby products to export to Europe and the U.S.

穩健嬰幼童用品(惠州)有限公司(簡稱TG)於1991年成立於臺灣。為了創造更好的產能,與更多的資源優勢,於1996年將工廠轉移到深圳投資。地理位置方便,其臨近鹽田港與蛇口港,具有水陸交通優勢。我們致力於生產安全高端嬰兒用品,出口歐洲美國。

 

 

The covered area of the factory is 25,000 ㎡, with a total of about 750 employees. TG puts emphasis on engineering and technological development, owning more than 100 patents. Our expertise and manufacturing experience has not only gained reputation among our customers but also assisted them in the awards of Best Baby and Toddler, Consumer award, innovation award, Mother&Baby award, Red Dot and more.

公司使用面積有兩萬平方米,總員工約有750人。穩健公司著重工程與技術開發,擁有超過一百項的專利。我們專業的製造經驗不只贏得客人信任也為客人贏得無數獎項, 如Best Baby and Toddler, Consumer award, innovation award, Mother&Baby award, Red Dot and so on. 

 

 

About Us
關於我們

TG has four assembly lines, a punching press, welding, injection molding, cutting, sewing, and anode coating to produce a variety of strollers as well as stroller accessory. Our slogan here at TG is “Always do and think more than is required of you to gratify our customers” Our staff is held accountable to the highest quality standard to ensure customer satisfaction. We build a strict quality control and continue improving ourselves to reach the ideal strollers in your minds.

公司擁有四條組裝線,並擁有金屬沖壓,焊接,金屬表面陽極涂裝處理,注塑模具製造及針車能生產各類童車軟件配套產品。穩健公司以“為顧客多想一些,把工作做得更細一些,使品質更好一些”為品質經營理念,建立有先進嚴謹的品質管理制度並不斷自我精進,希望製作出客人心中最滿意的理想推車。

Punching Press
沖壓

A group of careful but with high speed employees, we use jigs to confirm every tube is fit the specification of design.
擁有一批思想進取工作認真負責的員工,每件管件都用治具確認,達到所設計的規格。

Injeetion 
注塑

With more than 25 injections molding machines and our technical staffs are guarding high quality plastics for you. 
擁有25臺注塑機,及多名經驗豐富的技術人員為您的品質把關。

 

 

Molding
工模

We have mould designers and mould makers to design and assemble the moulds by our advanced mould processing equipments. 
多位高端模具設計師及模具製造師,以及先進的模具加工設備對模具成品進行設計與組裝。

Cutting
裁床

Our 3 electric circuitry composing auto cutting machines are able to cut the fabric with no waste and keep the quality of high efficiency. 
擁有三臺先進的電路排版即自動剪裁機,可以達到不浪費布料的高效率剪裁與品質保證。

Welding 
焊接

Approximately 40 technical staffs weld tube together smoothly, and make sure each tube match the specification of design.
40名左右的專業技術師傅用流暢的手法將管件焊接起來,並確保管件都達到設計規格。

Sewing 
針車

We have more than 200 sewing machines and professional training employees. Our aim is to produce your ideal soft goods.
擁有超過兩百臺機器與專業培訓,針對不同產品車縫出客人心中的理想軟件。 

Assembling lines 
組裝線

We have four professional assembling lines, and our principle of production is “self quality control”.  Our principle supports us to achieve your ideal final products.
四條組裝線皆訓練有素,以”人人自檢”為組裝原則來製造出您的理想成品。